Regal Anti-Corrosive Zinc Phosphate Primer. If we don't have stock in the branded tins, we will send the same product in unbranded, plain white tins. Please note, this will still be the same product. Colours shown are for guidance only as the appearance can vary between computer screens.
We could mix your choice of colour for orders of 200+Ltrs. The substrate should be clean, free from oil, grease or other agents which may impair adhesion or drying.
Try a small test area first to ensure suitability for the job. Coverage usually 5-10m² / Ltr depending on the surface. Use our Industrial Thinner (see separate listing) if necessary to achieve the correct coverage rate eg. In low temperatures when the paint is thicker. An electric drill with stirrer attachment is recommended for large tins.
Apply a minimum of 2 coats and until a uniform finish is achieved. Touch dry - 1-2 hrs. Hard dry - 3-4 hrs. All figures are approximations at 20°C given as a guide and dependent on variables such as temperature, humidity, air circulation, etc. Please ensure you order enough as the colour can vary between batches.
WE ALSO OFFER A FULL CONTRACT PAINTING SERVICE - FLOORS, LINE MARKING, WALLS, CLADDING, MACHINERY, STRUCTURAL STEELWORK, ETC. A full range of other industrial coatings including. Concrete Etching Solution (for power floated floors). Quick Drying Anti-Corrosive Zinc Phosphate Primer.DD1-3, EH, FK1-14, G, KA1-26, KA29-30, KY, ML, PA1-19, PH1-14, TD1-8. AB, DD4-11, DG, FK15-21, IV1-3, IV5-40, IV52-54, IV63, KW1-14, PA21-39, PH15-41, TD9-15. HS, IV4, IV41-51, IV55-56, KA27-28, KW15-17, PA20, PA40-49, PA60-78, PA80, PH42-50, ZE. Pallet Rates Available on larger orders, usually 200+Ltrs.
Collection Can be made by separate arrangement. This item is in the category "Business, Office & Industrial\Building Materials & Supplies\Industrial Paint, Coatings & Supplies\Industrial Paints".
The seller is "24_heures" and is located in this country: GB. This item can be shipped to United Kingdom.